Artist Litre Epoxy Resin Starter Kit (A)

Artist Resin 1:1 One Litre Epoxy Resin Jewellery and keychain set.

500ml Part A and 500ml Part B (1 litre kit)

Receive with each purchase: popsicle sticks, pipettes, and 2 pairs of disposable glove's

1Lt  Epoxy Resin Kit

1 x Daisy Mould

3 x 10g Premium Chunky Glitters

3 x 5g Mica Powders

5 x Keychains 

12 x Earring hooks

50 x 8mm Jump Rings

50 x Mini Screws

It has taken us a long time to perfect our epoxy resin formula.

Unlike others on the market it has a Crystal Clear Glass effect, No odour, UV stabiliser, Anti yellowing and Self-levelling. 

Easy to use, just mix equal parts and follow our simple instructions on the bottles.

Can be used with wood, metal, glass, silicon moulds, counter tops, plastic, paper, photographs, shells, dried flowers and much more.

Mix in our Premium Super Sparkle Glitter (custom mixes of Chunky Holographic glitter) to add amazing shimmer and shine. For vibrant and concentrated colours, add a dash of our Premium Artko Mica Powder to your resin.

 500ml of Epoxy and 500ml of Hardener make up the 1 litre kit.

Contains no VOC’s or BPA and conforms to ASTM D-4

Artko Artist Resin 1:1 How to use


1. Mix equal parts of Artko Artist Resin 1:1 ratio in a disposable measuring cup or a silicon mixing cup.
2. Stir slowly until resin goes clear for about 5 mins.
3. At this stage you can add our “Super Sparkle Glitter” Holographic custom mixes or add our Artko Mica Powder a little at a time until you reach your desired depth of colour.
4. Then pour into a mould or onto a flat surface and leave to cure .
5. Cure time @ 25 degrees is touch dry 3 -4 hrs and total cure 12 – 24 hrs



Tips
1. Put resin bottles Part A & Part B into warm water for 30 mins before mixing. This helps to minimise bubbles and gives a better consistency.
2. Use a heat gun or flame to remove unwanted bubbles at the surface
3. Alternatively, use a toothpick or pin to burst bubbles that have risen to the surface.