Diamond Rock Extra Hard Epoxy Resin 3.78 litre

Epoxy Resin "Diamond Rock" Extra Hard 3.78 litre

1 gallon kit (3.78 litres) - 1.89 litre Part A & 1.89 litre Part B

PREMIUM QUALITY : Similar properties to our Table Top resin but for projects that require an extra hard finish, our Artko Diamond Rock Extra Hard Resin is ideal for table tops, bar tops, counter tops, artwork, paintings and can be used for any type of coating. It's a high build epoxy, glass like finish, cures crystal clear. It is suitable for pours up to 6mm (1/4").  For thicker applications please use multiple pours.  Shore Hardness of 82.

Crystal Clear Glass effect, No odour, UV stabiliser, Anti-yellowing, heat resistant, self-levelling, scratch resistant, water resistant, no sweating under high humidity, easy to use and mixes perfectly with mica powder and all other epoxy pigments, Easy to use 1:1 ratio, 

Diamond Rock Extra Hard Resin: Maximum pour depth of 0.6cm (1/4"),  when poured, it will self level at approximately 0.3cm (1/8"). This resin is not suitable for Moulds.

Coverage for our 3.78 Litre Kit: Seal Coat 4.5 square mts or 48square ft, Flood Coat 1.5 square mts or 16 square feet.

Diamond Rock Extra Hard Resin 1:1 How to use

1. Mix equal parts of Artko Epoxy Resin 1:1 ratio in a disposable measuring cup or bucket or use silicon mixing cup.
2. Stir slowly for 5-6mins until resin goes clear removing streaky appearance.
4. Then pour into a mould or onto a flat surface and leave to cure .
5. Cure time @ 25 degrees is touch dry 12 hrs and total cure 48 hrs


Tips
1. You can put resin bottles (Part A & Part B) into a warm water for 30 mins before mixing. This helps with bubbles and consistency.
2. You can use a mini prophane torch to burst unwanted bubbles.
3. You can also use a toothpick to burst bubbles that have risen to the surface.